热线电话:400-879-1999 山汽官方微信
郑重声明 购机 售后
您现在所在的位置: 首页> 新闻资讯 > 行业新闻 >


所属分类:行业新闻 发布时间:2022-09-23 来源: 浏览量:18

1. Allow the mixing tank to run at full speed for one or two minutes before discharging from the charging mixer truck. The concrete shall be fully mixed. If necessary, some water can be added to make the concrete more uniform and convenient for unloading.
2. The mixing tank of the feeding mixer truck must be carefully washed. When washing the tank, wash it carefully, and turn the water forward and backward twice, and then release it. In one trip, put all the water in the tank into the tank, and then return to the station to add water to clean the tank.
3. Don't be careless when unloading materials. When discharging, watch yourself to prevent the discharger from operating the discharging lever randomly. Stop every time when the tank of the feeding mixer rotates forward and backward in the middle to protect the reducer, supporting wheel, etc. Keep a good relationship with the discharging workers, and don't sleep too well when discharging materials. In case the workers get upset and put your self feeding mixer on the construction site without turning the cans, it will be troublesome if the cans become stuffy.
4. Wet the chute of the discharge hopper before discharging. When discharging, park the truck on the flat ground as much as possible and wet the chute of the discharge hopper before discharging to facilitate cleaning.
The above is a detailed introduction to the automatic feeding mixer, and we hope it will be helpful to you. If you have any questions, you are welcome to contact us. We will provide services for you with our attitude


首页 产品 电话 置顶