bst2222全球奢华游戏公司_bst2255全球奢华游戏_贝斯特全球最奢游戏2222

bst2222全球奢华游戏公司
热线电话:400-879-1999 山汽官方微信
郑重声明 购机 售后
在线询价
热线电话:400-879-1999
您现在所在的位置: 首页> 新闻资讯 > 行业新闻 >

为什么使用自动上料搅拌机贮罐后需要清洗维护?

所属分类:行业新闻 发布时间:2022-02-21 来源: 浏览量:18

由于混凝土会在短时间内凝固成硬块,且对混凝土强制搅拌机钢材和油漆有一定的腐蚀性,所以每次使用混凝土强制搅拌机贮罐后,洗净粘附在混凝土贮罐及进出料口上的混凝土是每日维护一定要认真进行的工作。其中包括:
Since the concrete will solidify into hard blocks in a short time and have certain corrosivity to the steel and paint of the concrete forced mixer, it is necessary to clean the concrete adhered to the concrete storage tank and the inlet and outlet after each use of the concrete forced mixer storage tank. These include:
1.每次装料前用水冲洗进料口,使进料口在装料时保持湿润;
1. Wash the inlet with water before loading each time to keep the inlet moist during loading;
2.在装料的同时向随混凝土强制搅拌机自带的清洗用水水箱中注满水;
2. Fill the cleaning water tank provided with the concrete forced mixer with water while loading;
3.装料后冲洗进料口,洗净进料口附近残留的混凝土;
3. After loading, wash the inlet and clean the residual concrete near the inlet;
4.到工地卸料后,冲洗出料槽,然后向混凝土贮罐内加清洗用水30—40 L;在混凝土强制搅拌机回程时保持混凝土贮罐正向慢速转动;
4. After unloading at the construction site, wash the discharge tank, and then add 30-40 l of cleaning water to the concrete storage tank; Keep the concrete storage tank rotating forward and slowly when the concrete forced mixer returns;
5.下次装料前切记放掉混凝土贮罐内的污水;
5. Remember to drain the sewage in the concrete storage tank before the next loading;
6.每天收工时完全清洗混凝土贮罐及进出料口周围,保证不粘有水泥及混凝土结块。
6. At the end of each day, completely clean the concrete storage tank and around the inlet and outlet to ensure that there is no cement and concrete caking.
热门产品 / HOT PRODUCT

 

首页 产品 电话 置顶
Baidu
sogou