热线电话:400-879-1999 山汽官方微信
郑重声明 购机 售后
您现在所在的位置: 首页> 新闻资讯 > 行业新闻 >


所属分类:行业新闻 发布时间:2020-12-29 来源: 浏览量:18

1. 油漆表面的氧化:在强烈的紫外线照射下,小型搅拌车的汽车膜将不断蒸发油以保护自身。随着时间的流逝,它将导致油漆表面油的过多损失,在空气中形成氧化层,影响油漆表面的亮度和光泽度。此时,在汽车漆中可以清楚地观察到变黑,变白,缺乏光泽等现象。如果情况更严重,可以通过打磨和抛光处理。
1. Oxidation of paint surface: under the strong ultraviolet radiation, the automobile film of small mixer will continuously evaporate oil to protect itself. With the passage of time, it will cause excessive loss of oil on the paint surface, form oxide layer in the air, and affect the brightness and gloss of the paint surface. At this time, the phenomenon of blackening, whitening and lack of luster can be clearly observed in the car paint. If the situation is more serious, it can be treated by grinding and polishing.
2. 交通膜:小型搅拌车在工作过程中容易因摩擦而产生静电,会吸收大量的灰尘和油污。长时间在表面上会形成牢固的“交通膜”,从而导致油漆表面被氧化和腐蚀。对车辆进行研磨和抛光可以有效地解决这种情况。
2. Traffic film: small mixer is easy to generate static electricity due to friction in the working process, which will absorb a lot of dust and oil. A strong "traffic film" will form on the surface for a long time, resulting in oxidation and corrosion of the paint surface. Grinding and polishing the vehicle can effectively solve this problem.
3. 裂缝:一些车主经常忽略油漆的表面护理。小型搅拌车的工作环境非常特殊。金属漆可能会产生一些细微的裂纹,这些裂纹会不断向下渗透,在严重的情况下,它将渗透到整个彩色漆层。重质喷漆的质量差也可能导致此问题。如果车主发现车身破裂,建议经常上蜡并妥善保管。
3. Cracks: some car owners often neglect the surface care of paint. Very small mixer working environment. Metallic paint may produce some fine cracks, these cracks will continue to penetrate downward, in serious cases, it will penetrate into the whole color paint. Poor quality of heavy spray paint may also cause this problem. If the car owner finds that the car body is cracked, it is recommended to wax it frequently and keep it properly.
4. 褪色:空气污染是导致汽车油漆褪色的主要原因。褪色和氧化的区别在于,汽车涂料的褪色会导致车身颜色不均匀。如果程度相对较轻,则可以进行简单的研磨和抛光。如果颜色严重褪色,则必须重新涂漆。
4. Discoloration: air pollution is the main cause of discoloration of automobile paint. The difference between discoloration and oxidation is that discoloration of automotive coatings can lead to uneven body color. If the degree is relatively light, simple grinding and polishing can be carried out. If the color is seriously faded, it must be repainted.
5. 身体上的痕迹:因鸟粪,焦油等引起的轻微腐蚀痕迹可以打磨;由氧化和长期使用化学试剂形成的水印可以通过打蜡和抛光处理。在严重的情况下,需要重新粉刷;摩擦引起的细微划痕标记通常通过的抛光方法去除。
5. Marks on the body: slight corrosion marks caused by bird droppings and tar can be polished; watermarks formed by oxidation and long-term use of chemical reagents can be waxed and polished. In the case of severe scratches, the mark needs to be removed by professional polishing.
Thank you for reading this article. Source: automatic feeding mixer. For more information and questions, please click: We will continue to work hard to provide services for you, thank you for your support!


首页 产品 电话 置顶