热线电话:400-879-1999 山汽官方微信
郑重声明 购机 售后
您现在所在的位置: 首页> 新闻资讯 > 公司新闻 >


所属分类:公司新闻 发布时间:2022-04-18 来源: 浏览量:18

The cylinder of small concrete mixer truck is a component that forms the working volume with the piston. The function of the cylinder is to convert the pressure energy of compressed air into mechanical energy, and the driving mechanism makes linear reciprocating motion, swing and rotation motion. So, how to prevent the cylinder of small concrete mixer from cracking? Let's introduce:
There are many factors leading to the cylinder rupture of small concrete mixer truck. To prevent the cylinder rupture, we should do: when the engine temperature is too high, we must wait until the engine temperature decreases, and then add water to start; Do not start the engine after it is cold Drain the water to avoid cracking the cylinder; When getting off in severe cold conditions, you must let it cool When the vehicle is started, the water is heated; If the parking time in winter is long and the water cannot be drained, the vehicle can be started intermittently to keep the engine at a certain temperature without freezing. It is not allowed to bake the vehicle directly with blowtorch or open fire. At the same time, it is cold But the water must be clean.
If the cylinder liner of a small concrete mixer is damaged, the engine will absorb cold air during the intake stroke In the compression stroke and work stroke, the high-pressure gas will enter the cold from the damaged place But the waterway. No matter what happens, it will hinder the formation and combustion of combustible mixture, and even make the engine work abnormally, which will seriously affect the service life of the engine.
The above is a detailed introduction to the automatic feeding mixer truck. I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service /


首页 产品 电话 置顶