Prepare emergency drive hose, shut down the fault from the feeding mixer, and remove the high pressure oil pipe connector on the hydraulic motor.
Turn off the rescue vehicle, remove the high-pressure oil pipe of its hydraulic motor, and connect it with the corresponding connector on the failure vehicle with emergency drive hose.
Start the rescue vehicle, and turn its control handle to the discharging position. The failure is discharged from the concrete in the loading mixer truck.
After emergency drive, remove the drive hose and restore the two vehicles to the original condition.
If the above methods are difficult to implement, the following methods shall be used to discharge the concrete immediately.
Put a wooden wedge between the idler and the raceway to control the rotation of the mixing drum. Turn off the engine of the mixer from the feeding mixer, loosen one of the high-pressure oil pipes of the hydraulic motor, and the mixing drum can rotate freely. Control the rotation of the mixing drum, turn the maintenance hole to the lower part, then open the maintenance hole and clean the concrete in the drum. After the concrete is discharged, the concrete mixer shall be restored to its original state.
The above highlights are from: automatic feeding mixer for more wonderful content, please click to enter our website: , we will have more wonderful content waiting for you to check, please continue to pay attention to us.